Product ID:III SI CARTRIDGE (BLACK), CANON ITEM:R64-0002-010
MSDS Date:05/12/1995
FSC:6850
NIIN:01-343-6998
MSDS Number: BXDPX

AMERICAN LASER INC

1007 RIPLEY ST
SILVER SPRING, MD 20910
US

Emergency Phone: 301-588-4850

Info Phone: 301-588-4850/800-258-6637

Cage: 0S0F8

AMERICAN LASER INC

SILVER SPRING, MD 20910 US

Telephone: 301-588-4850

Cage: 0S0F8

STYRENE/ACRYLATE POLYMER

Fraction By Weight: 55-65%

IRON OXIDE

CAS: 1317-61-9

Fraction By Weight: 30-40%

OSHA PEL 10 MG/M3

ACGIH TLV: 5 MG/M3

SALICYLIC ACID CHROMIUM CHELATE

CAS: 72869-85-3

Fraction By Weight: 1-3%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSIBLE UNLESS
THE CARTRIDGE IS FORCED TO BE BROKEN. INHAL:GASPING. DO NOT BREATHE
DUST. EYE:NO SPECIFIC HAZ IS KNOWN TO AMERICAN LASER. HOWEVER ANY
MATERIAL THAT CONTACTS EYE M AY BE IRRITATING. SKIN:LOW HAZ FOR
INDUSTRIAL HANDLING. NO DATA AVAILABLE FOR CHRONIC EFFECTS OF
OVEREXPOSURE.
Explanation of Carcinogenicity:PER MSDS:EACH INGREDIENT IS NOT LISTED
ON NTP/IARC/OSHA LISTINGS.
Effects of Overexposure:GASPING. EYE IRRITATING.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN CASE OF EYE CONTACT FLUSH WITHH PLENTY OF WATER.

Lower Limits:COMBUSTIBLE
Extinguishing Media:CO2, WATER, DRY CHEMICALS.
Fire Fighting Procedures:NONE.
Unusual Fire/Explosion Hazard:TONER MATL LIKE MOST ORG MATL IN POWDER
FORM IS CAPABLE OF CREATING DUST EXPLO.SEE NFPA PAMPHLET:643"STD
FOR PREV OF FIRE/DUST EXPL IN CHEM/DY PHAR/PLAS INDU"

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OF HNDLG.IF IT SHOULD OCCUR AVOID INHAL OF DUST.SWEEP MATL ONTO
PAPER & PLACE IN FIBER CARTON.PACKAGE APPROPRIATELY FOR SAFE FEED
TO INCINERATOR OR DISSOLV E IN COMPATIBLE WASTE SOLVENTS PRIOR
TOINCINERATI
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
FROM COTNACT WITH OXIDIZING MATERIALS.
Other Precautions:AVOID CREATING DUST. AVOID INHALATION OF DUST.

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
PER MSDS:AN ASSEMBLY COMPOSED OF PHOTOSENSITIVE DRUM, BLACK TONER
POWDER & CLEANER BLADE. TONER POWDER CANNOT BE REMOVED TIL
CARTRIDGE IS FORCED TO BE BROKEN.

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:212F,100C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4-1.5
Evaporation Rate & Reference:NEGLI (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS POWDER WITH SLIGHT PLASTIC ODOR (SEE
SUPPLEMENTAL)
Percent Volatiles by Volume:NEGLIG

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. HOWEVER
AVOID CREATING DUST-POWDER FORM IS CAPABLE OF CREATING DUST
EXPLOSION.
Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL
COMBUSTION WILL PRODUCE CARBON DIOXIDE AND PROBABLY CARBON
MONOXIDE.

Waste Disposal Methods:DISPOSE IN AN APPROPRIATE INCINERATOR OR
CONTRACT WITH LICENSED DISPOSAL AGENCY. DISPOSAL MAY BE SUBJECT TO
FED/STATE/LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.